Views:132 Author:Site Editor Publish Time: 2020-08-26 Origin:Site
1. Before starting the bar straightening machine, check whether the hydraulic oil of the hydraulic station, the gear oil of the reduction box, and the transmission box are full.
2. Before starting the main motor, check and adjust the rotation angle and adjust the working pressure of the hydraulic system.
3. Inject lubricating oil into each lubrication point, and check the operating condition of the mechanical transmission part to make it flexible in transportation.
4. Operators wear labor protection equipment, and must not leave their posts or stay on duty after turning on the rod straightening machine.
5. After the oil temperature and oil pressure of the hydraulic station are stable, the upper straightening roller is lifted to the initial position.
6. The material is received manually, the steel pipe is sent to the third pair of straightening rollers and then the upper straightening roller is pressed and clamped.
7. Turn on the main motor, the steel pipe will rotate forward and be straightened at the same time.
8. The motor stops, the straightening roller stops straightening, the upper straightening roller is lifted, and the straightened steel pipe is sent out.
9. If you need to reverse and straighten, you can use the reverse knob on the console to make the host reverse and perform reverse straightening.
10. The main motor stops, the straightening roller stops straightening, the steel pipe is returned to the starting position, and the next straightening program instruction is to be repeated.
11. After stopping, turn off the main power supply, and can not change the program controller at will.
Baote is famous round bar straightening machine manufacturer in China, providing high quality bar straightening machine and professional steel bar straightener knowledge. If you have any need, please contact us!